MI-409MZ Specifications

SPECIFICATIONS

Model MI-329M MI-409MZ
Motor Size 1.5 HP 2 HP
Electrical Requirements 110 VAC or 220 VAC (Convertible) 110 VAC or 220 VAC (Convertible)
Amperage 9 Amps @ 220 Volt / 18 Amps @ 110 Volts 9 Amps @ 220 Volt / 18 Amps @ 110 Volts
Table Size 31.5" x 9-3" 40" x 9-3"
X-Axis Travel 22" 25"
Y-Axis Travel 7.25" 7.25"
Quill Travel 5" 5"
Head Travel 15" 15"
Mill Column Construction Square with Adjustable Dovetail Ways Square with Adjustable Dovetail Ways
X & Y Axis Construction Adjustable Dovetail Ways Adjustable Dovetail Ways
Headstock Lubrication Oil Bath Reservoir & Site Gauge Oil Bath Reservoir & Site Gauge
Spindle Speeds 95, 175, 310, 450, 850, 1500 95, 175, 310, 450, 850, 1500
Spindle Taper R8 R8
Spindle Center To Column 9.5" 10"
Spindle Nose To Table Distance 2.5" to 18.25" 2.5" to 16.5"
Digital Position Readout On Quill Standard Standard
Powerfeed (X-Axis) Optional Standard
Powerfeed Z-Axis (Spindle) N/A Standard
Automatic Tapping Cycle N/A Standard

ELECTRICAL SPECIFICATIONS

Model MI-329M MI-409MZ
Power Requirements 110V/220VAC, Single Phase (Convertible) 110V/220VAC, Single Phase (Convertible)
Plug 6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied) 6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied)
Outlet (Not Included)
5-15R for 110 VAC, 6-15R for 220 VAC 5-15R for 110 VAC, 6-15R for 220 VAC
Motor Type
Induction Type A/C Induction Type A/C
Motor Power 1.5 HP 2 HP
Motor Amp Draw 18 Amps @ 110 VAC / 9 Amps @ 220 VAC 18 Amps @ 110 VAC / 9 Amps @ 220 VAC

MECHANICAL SPECIFICATIONS

Model MI-329M MI-409MZ
Spindle Speed Control Mechanical Mechanical
Number Of Speeds 6 6
Available Speed 95, 175, 310, 450, 850, 1500 95, 175, 310, 450, 850, 1500
Longitudinal Travel 22" 30"
Cross Travel 7.25" 7.25"
Quill Travel 5" 5"
Spindle Taper R8 R8
T-Slot Size 5/8" 5/8"
Draw Rod Size 7/16" x 20 7/16" x 20
Drill Chuck / Arbor Included 1/2" Drill Chuck on an R8 Arbor Included 5/8" Drill Chuck on an R8 Arbor
Mill Head Rotation 90 Degrees Left of Right 45 Degrees Left of Right
Mill Head Lubrication Oil Bath with Reservoir and Site Gauge Oil Bath with Reservoir and Site Gauge
Dial Calibrations .001" .001"
Mill Feed Both Coarse and Fine Feed Both Coarse and Fine Feed
Powerfeed X-Axis Optional Standard
Powerfeed Z-Axis (Spindle) N/A Standard
Max Drill Size 1" 1"
Max Face Mill 3" 3"
Max End Mill 1" 1"
Max Tapping 1/2" 1/2"

PHYSICAL DIMENSIONS

Model MI-329M MI-409MZ
Machine Weight 716 lbs 786 lbs
Machine Size

36" L x 34" W x 56" H (at heighest point of travel)

40" L x 34" W x 56" H (at heighest point of travel)
Footprint 25" x 16" 25" x 16"
Shipping Weight 807 lbs 870 lbs
Shipping Crate Size

41" L x 36" W x 48" H

41" L x 36” W x 48" H
Shipping Crate Material Wood Wood

Sorry, there are no products in this collection