GRANITE XT SPECS

Model	1340
Length	62"
Width	22-1/2"
Height	39"
Shipping Weight	904 lbs
Machine Weight	750 lbs
Crate Size Length	64-1/2"
Crate Size Width	22-3/4"
Crate Size Height	44"
Floor Area Requirement	85" x 43"

ELECTRICAL SPECIFICATIONS

Amperage	16 for 110v, 8 for 220v
Horsepower	2
Motor Type	BLDC
Phase	Single
Voltage	110 A/C or 220 A/C
Frequency	50/60 Hz

GENERAL GRANITE SPECIFICATIONS

T-Slot Size	7/16"
Lathe Spindle Accuracy TIR	+/- 0.00078"
Powerfeed (X-Axis)	Yes
Powerfeed (Y-Axis)	Yes
Powerfeed (Z-Axis)	No
Table Size	6-3/4" x 17-3/4"
Threading Dial	Yes

LATHE SPECIFICATIONS

Model	1324 / 1340
Distance Between Centers	24" / 40"
Dial Calibration Leadscrew	0.001" (0.0254 mm)
Dial Calibration Longfeed Rack	0.01" (0.254 mm)
Dial Calibration Crossfeed	0.001" (0.0254 mm)
Dial Calibration Tailstock	0.001" (0.0254 mm)
Dial Calibration On Toolpost	0.001" (0.0254 mm)
Feed Rate (X-Axis)	0.003" - 0.020"
Feed Rate (Y-Axis)	0.001" - 0.006"
Headstock Taper	MT4
Lathe Chuck Bore	1.6"
Lathe Chuck Diameter	6"
Lathe Chuck - Max. Iam/W/P	6"
Lathe Chuck - Min. Diam/W/P	1/8"
Lathe Chuck Mount	D1-4 Camlock
Lathe Chuck Type	3-Jaw Self-Centering
Spindle Bore	1.125"
Spindle Speeds	Variable 100-2650 RPM
Spindle Accuracy TIR	0.00078"
Swing Over Bed	13"
Swing Over Worktable	7-1/2"
Tailstock Offset	19/32"
Tailstock Taper	MT3
Tailstock Barrel Travel	3"
Threads	SAE 7-52 TPI
Toolpost Travel	3-3/16"
Toolbit Size	1/2"
X-Axis Travel W/Tailstock	20" / 35"
Y-Axis Travel	7-5/8"

MILL/DRILL SPECIFICATIONS

Column Diameter	3-3/16"
Dial Calibration Drill-Coarse Feed	0.05" (1.27 mm)
Dial Calibration Mill-Fine Feed	0.001" (0.0254 mm)
Dial Calibration Millhead Up/Dn Crank	0.05" (1.27 mm)
Drawbars Size	7/16"
Drill Chuck Size Mill/Drill	5/8"
Drill Chuck Size Tailstock	1/2"
Drill Chuck Arbor Size	R-8/JT3
Feed Rate (Mill X-Axis)	0.003" - 0.020"
Feed Rate (Mill Y-Axis)	0.001 - 0.006"
Head Rotation	360 Degrees
Head Travel Z-Axis	4-3/8"
Quill Diameter	2-3/4"
Quill Travel	4-7/8"
Spindle Center To Front Of Chuck	8-1/2"
Spindle Center To Lathe Spindle Flange	11-1/4"
Spindle Face To Back Of Spindle	13-3/4"
Spindle To Table Distance (Min.-Max.)	4" to 13-3/8"
Spindle Speeds	Variable 400-2600 RPM
Spindle Taper	R8
Tool Size Limit	1"
X-Axis Travel	13-3/8"
Y-Axis Travel	7-5/8"