Bench milling machine for small shop features include:
- Gear-drive Spindle - for Power and Torque
- Built-In Z Axis Digital Read Out - Optimum accuracy
- Electric Powerfeed on X axis (Optional)
- 110/220V - You choose voltage for your shop
- Simple operations
- Accurate - Superior Gib Design
- Rigid dovetail ways provide stability and increased accuracy
Smithy Quality is Tops: Smithy designs and builds some of the best machines. We pay attention to details, all through the process. Smithy is well-known for it's after sales service and two year warranty. Each machine is inspected twice - before it leaves the factory and before it leaves our warehouse in Manchester, MI to head your way.
| Heavy Duty Cast Base and Column | Over 700 lbs. of cast iron provides positive damping effect - offers greater accuracy. |
| Flat Dove Tail Ways | Supports more weight with better weight distribution. |
| Hand Scraped Ways | Another plus for greater accuracy. |
| Adjustable Gibs | Allows for adjustment to assure maximum accuracy. |
| Square Column | Keeps hill head properly indexed to the table, assuring accuracy. |
| Gear Driven Spindle | No belts to change. More consistent power conversion and torque. |
| Easy Dual Lever Speed Adjustment | Easy to select appropriate speeds. Always works at the correct speed. |
| 90 Degree Rotating Head | Set and indicate mill head to accurately mill at angles between 0-90 degrees. |
| Head Height Adjustment | Simple to move head up and down for faster machine set-up and operations. |
| 1.5 HP 110/220V Spindle Motor | Big power and torque. Cool running 110 volt power assures longer motor life. |
| 5” Cutting Depth on Mill Head | Good runout from min to max depth. |
| Bridgeport Standard R8 Collet | Industry standard cutting tools and holders are low cost and easy to use. |
| DRO on Z Axis | Assures accurate milling depth of cut. |
| Accurate Floating Dials | Calibrated in thousands. Screw pitch = 10 threads per inch. |
| Long Bed and Work Table | 9” x 32” work table offers lots of room for complex or multiple set-ups. Three T-slots for easy fixture set-up. |
| Bridgeport Standard 5/8” T-Slot | Industry standard clamping/holding accessories are low cost and easy to use. |