Granite XT General Features

Lathe Spindle Bearing Upgrade

• High precision bearings provide higher accuracy and longer service life!

Keyed Lock-Out Switch

• Keep machine locked and safe while you are away.

Digital Lathe RPM Readout

• Provides accurate RPM readout to aid in maintain proper feeds and speeds.

High Quality Paint Upgrade

• Improved paint quality over old Granite model, improved durability.

VARIABLE SPEED DRIVE

Simply by turning a dial. Increases efficiency, assures fine finishes.

QUICK CHANGE GEAR BOX

Allows immediate thread pitch selection and adjustment of power feed rates.

VERY ACCURATE

Factory specified to +/- .0005”.

POWER FEED ON X AND Y AXES

Power feed on both X and Y axis while turning or milling. Speeds up your work and assures smooth finishes.

LARGE PASS-THROUGH SPINDLE BORE

HALF-NUT & THREADING DIAL

Precise engagement assures accurate inch and metric thread cutting. The combination of half-nut and threading dial allows you to cut threads like a journeyman.

ADJUSTABLE HEIGHT MILL HEAD

Raise your mill head to accommodate larger work pieces. Lower the mill down to get down close to small set-ups.

DRILL PRESS/FINE FEED SELECTOR

Press the selector IN to engage the fine-feeding function for milling operations. Pull the center nob OUT to use your Granite as a drill press.

ROTATING MILL HEAD

Mill rotates 360 degrees, allowing you to swing it out of the way for lathe operations. The mill head can also be rotated 180 degrees from standard position and set up to work on extra-large or long work pieces.

R8 MILL SPINDLE TAPER

The industry standard taper for bench and knee mill tooling. Add-on tooling is widely available and is generally lower priced.

RACK AND PINION CARRIAGE TRAVEL

Disengage the half-nut and turn rapid feed handle to quickly move work table back and forth for quick positioning.

ERGONOMIC MAIN POWER CONTROL

Conveniently located – with easy to reach kill switch. Has forward/reverse toggle and push button on/off switch.

DRO READY

DRO mounting holes are drilled and tapped at the factory for easy attachment of DRO upgrade kits.

D1-4 CAMLOCK LATHE CHUCK

Industry standard for lathe chuck mounting. Accurate chuck positioning, yet easy to mount or remove lathe chuck.

MORE HORSEPOWER

Larger 2 HP spindle drive motor. NEW Design! Brushless DC spindle motor adds extra power to take heavier cuts with smoother finishes. Great low end torque.

30% MORE MILLING CAPACITY

With extended mill head. Take on bigger projects with ease.

CRASH PROTECTION SYSTEM

Unique shear pin design protects your machine from major damage if it is run past its travel limits.

40% MORE LOW END TORQUE

Take heavier cuts without overworking spindle drive motor.

MILL HEAD LOCKING SYSTEM

Assures higher precision milling operations. Securely holds mill head position when locked down. Increases rigidity and machining accuracy.

EXTENDED TAILSTOCK TRAVEL

Add extra tailstock stroke. Reach further over the work table and center drill deeper.

110 OR 220 VOLT POWER

Choose 110 Volt power for convenient operation in a small workshop setting. Get your Granite with 220 Volt power for cool running all-day operation and long life.

INDUSTRIAL GRADE BEARINGS

Industrial applications demand more of tools – better bearings provide greater accuracy, longer life and more operating hours.