Granite XT 1324 Specifications
SPECIFICATIONS
GENERAL SPECIFICATIONS
Model |
1324 |
Length |
46" |
Width |
22-1/2" |
Height |
39" |
Shipping Weight |
794 lbs |
Machine Weight |
683 lbs |
Crate Size Length |
49-1/2" |
Crate Size Width |
22-3/4" |
Crate Size Height |
44" |
Floor Area Requirement |
72" x 43" |
ELECTRICAL SPECIFICATIONS
Amperage |
16 for 110v, 8 for 220v |
Horsepower |
2 |
Motor Type |
BLDC |
Phase |
Single |
Voltage |
110 A/C or 220 A/C |
Frequency |
50/60 Hz |
GENERAL GRANITE SPECIFICATIONS
T-Slot Size |
7/16" |
Lathe Spindle Accuracy TIR |
+/- 0.00078" |
Powerfeed (X-Axis) |
Yes |
Powerfeed (Y-Axis) |
Yes |
Powerfeed (Z-Axis) |
No |
Table Size |
6-3/4" x 17-3/4" |
Threading Dial |
Yes |
LATHE SPECIFICATIONS
Model |
1324 / 1340 |
Distance Between Centers |
24" / 40" |
Dial Calibration Leadscrew |
0.001" (0.0254 mm) |
Dial Calibration Longfeed Rack |
0.01" (0.254 mm) |
Dial Calibration Crossfeed |
0.001" (0.0254 mm) |
Dial Calibration Tailstock |
0.001" (0.0254 mm) |
Dial Calibration On Toolpost |
0.001" (0.0254 mm) |
Feed Rate (X-Axis) |
0.003" - 0.020" |
Feed Rate (Y-Axis) |
0.001" - 0.006" |
Headstock Taper |
MT4 |
Lathe Chuck Bore |
1.6" |
Lathe Chuck Diameter |
6" |
Lathe Chuck - Max. Iam/W/P |
6" |
Lathe Chuck - Min. Diam/W/P |
1/8" |
Lathe Chuck Mount |
D1-4 Camlock |
Lathe Chuck Type |
3-Jaw Self-Centering |
Spindle Bore |
1.125" |
Spindle Speeds |
Variable 100-2650 RPM |
Spindle Accuracy TIR |
0.00078" |
Swing Over Bed |
13" |
Swing Over Worktable |
7-1/2" |
Tailstock Offset |
19/32" |
Tailstock Taper |
MT3 |
Tailstock Barrel Travel |
3" |
Threads |
SAE 7-52 TPI |
Toolpost Travel |
3-3/16" |
Toolbit Size |
1/2" |
X-Axis Travel W/Tailstock |
20" / 35" |
Y-Axis Travel |
7-5/8" |
MILL/DRILL SPECIFICATIONS
Column Diameter |
3-3/16" |
Dial Calibration Drill-Coarse Feed |
0.05" (1.27 mm) |
Dial Calibration Mill-Fine Feed |
0.001" (0.0254 mm) |
Dial Calibration Millhead Up/Dn Crank |
0.05" (1.27 mm) |
Drawbars Size |
7/16" |
Drill Chuck Size Mill/Drill |
5/8" |
Drill Chuck Size Tailstock |
1/2" |
Drill Chuck Arbor Size |
R-8/JT3 |
Feed Rate (Mill X-Axis) |
0.003" - 0.020" |
Feed Rate (Mill Y-Axis) |
0.001 - 0.006" |
Head Rotation |
360 Degrees |
Head Travel Z-Axis |
4-3/8" |
Quill Diameter |
2-3/4" |
Quill Travel |
4-7/8" |
Spindle Center To Front Of Chuck |
8-1/2" |
Spindle Center To Lathe Spindle Flange |
11-1/4" |
Spindle Face To Back Of Spindle |
13-3/4" |
Spindle To Table Distance (Min.-Max.) |
4" to 13-3/8" |
Spindle Speeds |
Variable 400-2600 RPM |
Spindle Taper |
R8 |
Tool Size Limit |
1" |
X-Axis Travel |
13-3/8" |
Y-Axis Travel |
7-5/8" |