MI-329M Bench Milling Machine
MI-329M Bench Milling Machine is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
Add some general information about your delivery and shipping policies.
Video Links
Smithy Training Videos - Learning to Machine on a Lathe Mill Combo
Years ago, Smithy produced a series of videos about learning to machine on a lathe mill combo machine. We hear often that these videos have been very helpful. This series is used in quite a few schools and tech training centers, literally throughout the world. Teachers like these videos because the concepts of machining are presented in a very logical way. Hopefully these videos will be helpful to you.
Best Practices - Lathe Turning
Introduction to standard metal late operations. An introduction to basic metal turning concepts is provided, along with basic instructions on lathe operation.
Workholding & Set up
Review of guidelines for installing a variety of work piece types and sizes on a metal lathe. This video covers turning between centers and proper mounting of a work piece in a lathe chuck. Proper use of lathe follow rests and steady rests is included.
Cutting Tool Selection
This video explains the selection and use of single point cutting tools on the lathe. Choosing the right cutting tool for a given operation is an important step when setting up a lathe. Selecting tool types and cutting speeds is also reviewed.
Facing Operations
This video demonstrates proper procedures and operator work process management for lathe turning and facing operations on a metal turning lathe. Reviews the various lathe turning operations that are typically used in a small shop setting.
Bench Top Milling & Drilling
Reviews the concepts of milling and drilling on a metal cutting mill/drill machine. Common practices in milling and drilling operations are presented. Tutorial on selecting best milling and drilling operations for a given task are provided.
Cutting Tool Selection
This video explains the selection and use of end mills and drill bits is covered. Choosing the right cutting tool for a given operation is an important step when setting up for a milling or drilling project. The foundation concept of selecting the best rotating cutting tool and cutting speed for a given project is also reviewed.
Workholding & Set-up
There are a wide variety of workholding tools that can be used to hold a work piece for milling or drilling operations. This video reviews the different concepts and practices in workholding for mill/drill operations. This video also offers some suggestions on workholding accessories to help you get started.
Basic Milling & Drilling Operations
This video starts by showing you machine controls used for milling and drilling operations on a small mill/drill machine. In this case, the Smithy Granite. The video also covers basic concepts and practices for effective metal milling and drilling on a bench top mill/drill machine.
Proper Machine Tool Maintenance
Proper maintenance of every machine tool is the key factor in that machine's ability to machine accurately and efficiently. Lubrication and maintenance are a big factor in assuring long life for every bench top lathe or mill/drill machine.
User Stories
Testimonials from Smithy's happiest customers
No Wait Time With My Smithy
"I have a granite 1324. I run a job shop outfit that does machining work for plastics manufacturing companies. My customers sometimes have orders with 2 or 3 day turn-around. I work in aluminum, plastic, and brass. What I enjoy most about Granite is the lathe work. It is really easy."
-Hai David Nguyen, L.K.B TX
More Convenient for Hobbyists
"I use my Smithy to make or modify parts for motorcycles and antique guns. I'm in this as a hobby. The Smithy probably has paid for itself but I haven't kept track. What is more important to me is the convenience of making my own parts, exactly as I need them when I need them."
-Kerry Klein, MI
Support Leads the Way
"I looked at other machining equipment but chose Smithy because of the quality, size, and availability of tech support. It's compact yet it does the work of larger units. It's a lot of machine that takes up a little space and it will pay for itself in the long run."
-Danny A. KY
Better Than a Grizzly
"After technical school, I did an apprenticeship in clock and watch repair and in tool and die making. I'm retired now and run a busy clock repair shop with my Smithy. I make parts for older clocks, cut clock gears, and make the cutters as well overhaul clock repair tools. I purchased a 9" x 19 bench lathe from Grizzly but returned it because of poor quality. I chose Smithy for its Sturdiness, its milling capabilities, and its compact size."
-William V-R., GA
No more down time
"Wendell and his business partner own a small textile factory. Last year, a German sewing machine clutch broke and production stopped. They weren't sure how long it would take to get a replacement part or if they could even find one. Putting their Smithy to work instead, they had the sewing machine back in production the same day."
-Wendell(Owner of Small Textile Company)
MI-329M Bench Milling Machine
Bench Milling Machine - Small Shop
MI-329M Bench Milling Machine, 1.5 HP (110/220 Volt)
Precision milling for every shop: Built-in accuracy - ready to cut through projects with precision and power. Solid function and features give you the best operation and ease of use for the price. Great value - combined with optimal milling capacity makes this the best small bench-top milling machine.
**PICTURED MACHINE IS SHOWN WITH OPTIONAL DRO**
OVERVIEW
SMITHY MI-329M MILL
Medium Duty 9” x 32” Gear Drive Mill
Accuracy adding features like square column, hand-scraped, flat dove-tail ways and adjustable gibs improve precision and assure consistent, positive results. Z axis DRO assures accurate depth of cut for precision milling operations. Rotating head, 5” cutting depth and Bridgeport standard cutting and clamping tools add versatility. Smithy’s 2 year warranty and hands on service also adds to the value.
Product Summary:
- 1.5 HP - 110/220 Volt
- Heavy - 762 lbs.
- R-8 Tooling - Industry Standard
- Z Axis Digital Readout
- Accurate - Gib Adjustments
- Gear Driven Spindle
- Square Column/Flat Dove Tail Ways
- Accurate Floating Dials
- Excellent FREE Tool Pack
- See Features and Specs Tabs for More Product Detail
Warranty Coverage:
- 2 Years Parts Warranty
______________________________________________________
Smithy MIDAS means:
- Rugged Design
- Quality Built In
- Inspected Twice
- Best Service Support
The best bench top mill value - for over 25 years!
FEATURES
Bench milling machine for small shop features include:
- Gear-drive Spindle - for Power and Torque
- Built-In Z Axis Digital Read Out - Optimum accuracy
- Electric Powerfeed on X axis (Optional)
- 110/220V - You choose voltage for your shop
- Simple operations
- Accurate - Superior Gib Design
- Rigid dovetail ways provide stability and increased accuracy
Smithy Quality is Tops: Smithy designs and builds some of the best machines. We pay attention to details, all through the process. Smithy is well-known for it's after sales service and two year warranty. Each machine is inspected twice - before it leaves the factory and before it leaves our warehouse in Ann Arbor, MI to head your way.
| Heavy Duty Cast Base and Column | Over 700 lbs. of cast iron provides positive damping effect - offers greater accuracy. |
| Flat Dove Tail Ways | Supports more weight with better weight distribution. |
| Hand Scraped Ways | Another plus for greater accuracy. |
| Adjustable Gibs | Allows for adjustment to assure maximum accuracy. |
| Square Column | Keeps hill head properly indexed to the table, assuring accuracy. |
| Gear Driven Spindle | No belts to change. More consistent power conversion and torque. |
| Easy Dual Lever Speed Adjustment | Easy to select appropriate speeds. Always works at the correct speed. |
| 90 Degree Rotating Head | Set and indicate mill head to accurately mill at angles between 0-90 degrees. |
| Head Height Adjustment | Simple to move head up and down for faster machine set-up and operations. |
| 1.5 HP 110/220V Spindle Motor | Big power and torque. Cool running 110 volt power assures longer motor life. |
| 5” Cutting Depth on Mill Head | Good runout from min to max depth. |
| Bridgeport Standard R8 Collet | Industry standard cutting tools and holders are low cost and easy to use. |
| DRO on Z Axis | Assures accurate milling depth of cut. |
| Accurate Floating Dials | Calibrated in thousands. Screw pitch = 10 threads per inch. |
| Long Bed and Work Table | 9” x 32” work table offers lots of room for complex or multiple set-ups. Three T-slots for easy fixture set-up. |
| Bridgeport Standard 5/8” T-Slot | Industry standard clamping/holding accessories are low cost and easy to use. |
SPECS
| Model | MI-329M | MI-409MZ |
| Motor Size | 1.5 HP | 2 HP |
| Electrical Requirements | 110 VAC or 220 VAC (Convertible) | 110 VAC or 220 VAC (Convertible) |
| Amperage | 9 Amps @ 220 Volt / 18 Amps @ 110 Volts | 9 Amps @ 220 Volt / 18 Amps @ 110 Volts |
| Table Size | 31.5" x 9-3" | 40" x 9-3" |
| X-Axis Travel | 22" | 25" |
| Y-Axis Travel | 7.25" | 7.25" |
| Quill Travel | 5" | 5" |
| Head Travel | 15" | 15" |
| Mill Column Construction | Square with Adjustable Dovetail Ways | Square with Adjustable Dovetail Ways |
| X & Y Axis Construction | Adjustable Dovetail Ways | Adjustable Dovetail Ways |
| Headstock Lubrication | Oil Bath Reservoir & Site Gauge | Oil Bath Reservoir & Site Gauge |
| Spindle Speeds | 95, 175, 310, 450, 850, 1500 | 95, 175, 310, 450, 850, 1500 |
| Spindle Taper | R8 | R8 |
| Spindle Center To Column | 9.5" | 10" |
| Spindle Nose To Table Distance | 2.5" to 18.25" | 2.5" to 16.5" |
| Digital Position Readout On Quill | Standard | Standard |
| Powerfeed (X-Axis) | Optional | Standard |
| Powerfeed Z-Axis (Spindle) | N/A | Standard |
| Automatic Tapping Cycle | N/A | Standard |
ELECTRICAL SPECIFICATIONS
| Model | MI-329M | MI-409MZ |
| Power Requirements | 110V/220VAC, Single Phase (Convertible) | 110V/220VAC, Single Phase (Convertible) |
| Plug | 6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied) | 6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied) |
|
Outlet (Not Included) |
5-15R for 110 VAC, 6-15R for 220 VAC | 5-15R for 110 VAC, 6-15R for 220 VAC |
|
Motor Type |
Induction Type A/C | Induction Type A/C |
| Motor Power | 1.5 HP | 2 HP |
| Motor Amp Draw | 18 Amps @ 110 VAC / 9 Amps @ 220 VAC | 18 Amps @ 110 VAC / 9 Amps @ 220 VAC |
MECHANICAL SPECIFICATIONS
| Model | MI-329M | MI-409MZ |
| Spindle Speed Control | Mechanical | Mechanical |
| Number Of Speeds | 6 | 6 |
| Available Speed | 95, 175, 310, 450, 850, 1500 | 95, 175, 310, 450, 850, 1500 |
| Longitudinal Travel | 22" | 30" |
| Cross Travel | 7.25" | 7.25" |
| Quill Travel | 5" | 5" |
| Spindle Taper | R8 | R8 |
| T-Slot Size | 5/8" | 5/8" |
| Draw Rod Size | 7/16" x 20 | 7/16" x 20 |
| Drill Chuck / Arbor | Included 1/2" Drill Chuck on an R8 Arbor | Included 5/8" Drill Chuck on an R8 Arbor |
| Mill Head Rotation | 90 Degrees Left of Right | 45 Degrees Left of Right |
| Mill Head Lubrication | Oil Bath with Reservoir and Site Gauge | Oil Bath with Reservoir and Site Gauge |
| Dial Calibrations | .001" | .001" |
| Mill Feed | Both Coarse and Fine Feed | Both Coarse and Fine Feed |
| Powerfeed X-Axis | Optional | Standard |
| Powerfeed Z-Axis (Spindle) | N/A | Standard |
| Max Drill Size | 1" | 1" |
| Max Face Mill | 3" | 3" |
| Max End Mill | 1" | 1" |
| Max Tapping | 1/2" | 1/2" |
PHYSICAL DIMENSIONS
| Model | MI-329M | MI-409MZ |
| Machine Weight | 716 lbs | 786 lbs |
| Machine Size |
|
|
| Footprint | 25" x 16" | 25" x 16" |
| Shipping Weight | 807 lbs | 870 lbs |
| Shipping Crate Size |
|
|
| Shipping Crate Material | Wood | Wood |
FAQS
WHO BUYS THESE MILLS FROM SMITHY?
IS THE TOOL PACK HELPFUL?
WHAT DO YOU MEAN BY “INSPECTED TWICE?”
WHY ARE THESE MILLS BETTER THAN OTHERS ON THE MARKET?
HOW LONG HAVE YOU BEEN SELLING THESE MILLS?
DO MANY LATHE BUYERS ALSO PURCHASE MILLING MACHINES?
Yes, the MI-1440 lathe matches well with the MI-409MZ milling machine - a machine shop combo that was built to last. Many customers buy this combination.
WHY SHOULD I BUY A MILLING MACHINE FROM SMITHY?
- Rugged Design
- Quality Built In
- Inspected Twice
- Best Service Support
DO I NEED TO BE A MACHINIST TO USE THE MACHINE?
FINANCING
SHIPPING FAQs
1. Basic Shipping Info
Machines within the continental US (lower 48 states) are shipped with a freight carrier - either YRC or Estes Express.
We offer 3 delivery options: Basic, Business and Deluxe. All machines and accessories that are in stock will ship out within
48 hours of purchase. Once shipped you'll receive an automatic email (if provided) with tracking information for the designated
freight carrier (YRC or EST). For pricing to Alaska, Hawaii and Puerto Rico, please call for a shipping quote.
2. Basic Delivery - Pick up from terminal
This delivery method will bring the machine to the freight terminal nearest you for pick up. Once the machine arrives at the terminal, they'll call you to let you know it's ready for pick up. They will load the machine into an open bed pickup, cargo van or trailer. You will need to bring with you an ID and proof of purchase which will be sent to you during the sales transaction.
3. Business Delivery - Forklift
The freight carrier will bring the machine directly to your business for easy offloading without notification - they assume if it is being delivered to a business that the business will be open during normal business hours. For this delivery method, you must have a forklift and your business must be semi-trailer accessible. If you are unsure about semi-trailer accessibility please contact the terminal to discuss options.
4. Deluxe Delivery - Residential
Lift gate curbside delivery -- the freight carrier will lower the machine to ground level, curbside, at the end of your driveway. They will generally use a box truck with a lift gate. That is not 100% guaranteed, so if your residence doesn't have box truck accessibility please contact your local terminal to discuss options. Also, there must be someone home to sign for delivery.
5. Shipment Tracking
Once your machine has left our warehouse, you'll receive an automated email with the tracking/PRO number. You can visit the Estes website at www.estes-express.com or the YRC website at www.yrc.com to track your shipment and know when it has arrived to the destination terminal. The terminal will not call you to let you know your shipment has arrived at the terminal or when it will be delivered to your business of choice. ONLY WITH LIFTGATE/RESIDENTIAL DELIVERY: Once your machine has reached the destination terminal, you will be contacted by a representative from the terminal to schedule a delivery window for drop off with the lift gate truck.
6. Shipping Prices
$269 - MI-1220 and MI-1230 LTD
$269 - Granite XT 1324
$329 - Granite XT 1340
$329 - Stand Alone Mills and Lathes (MI-329M, MI-409MZ, MI-1337L, MI-1440L)
***All stands - $80 to ship with machine, $140 without machine***
***Lift-gate delivery – Additional $70***
(Pricing is for the lower 48 states only, please call 800-476-4849 for pricing to any other locations or rate quotes on any machines not listed above.)
7. Transit Times
Shipping times will vary around the US. We ship directly out of Ann Arbor, MI 48103. To find out your specific travel time, click on the following link to the Estes website Transit Time Calculator
Deluxe delivery usually requires an extra 1-3 days to schedule a delivery appointment according to the vehicles route schedule.
8. Parts and Accessories Shipping
Accessories and parts are shipped with UPS and USPS the *SAME DAY* if ordered by 1pm EST. Machine Stands, Super Indexers, and Rotary tables are all shipped via freight carrier due to the size and weight and will require an extra shipping charge. All Accessories and parts are shipped standard ground unless otherwise specified.
9. Shipping to Canada
We offer two different options when dealing with customs, duties and taxes going into Canada. The first option is to act as your own servicing agent, we'll sell you the machine and ship from our location to the border; contacting a broker and paying duties, taxes and fees is up to you. The second option would be an all-inclusive package where we take care of everything for you; your job is to prepare to receive the machine when delivered. Please give us a call to get a shipping quote - the quote will include the cost of freight, GST/HST, and customs border crossing fees.
10. International Shipping.
Depending on the country in which you live, we will quote and ship to the port nearest you. Forwarding from the port to your door will be your responsibility, as well as paying import customs and taxes to your government. You must provide the machine you are interested, with any accessories, valid contact information, a ship-to address, and the port nearest you to obtain a quote. Please give us a call or email to discuss your options.
-
Lathe Specifications
Bench milling machine for small shop features include:
Gear-drive Spindle - for Power and Torque
Built-In Z Axis Digital Read Out - Optimum accuracy
Electric Powerfeed on X axis (Optional)
110/220V - You choose voltage for your shop
Simple operations
Accurate - Superior Gib Design
Rigid dovetail ways provide stability and increased accuracy
Smithy Quality is Tops: Smithy designs and builds some of the best machines. We pay attention to details, all through the process. Smithy is well-known for it's after sales service and two year warranty. Each machine is inspected twice - before it leaves the factory and before it leaves our warehouse in Ann Arbor, MI to head your way.
Financing Options
Consumer / Personal Financing
- 48-month financing plan
- 5.99% interest rate
- Promotional Financing Plan only when purchasing Smithy equipment
Commercial / Business Financing
- Soft-pull credit - doesn't affect credit score
- Flexible rates and payment plans
- Approval with low credut
Canada - Business Financing
- Soft-pull on credit - doesn't affect credit score
- Flexible rates and payment plans
- Approval with low credit
WHO BUYS THESE MILLS FROM SMITHY?
Businesses/Professional: Schools purchase quite a few. As so military organizations, R & D labs, etc. Small machine shop/production shops are frequent buyers.Garage/Home Shops: The machines are designed and built for professional parts production settings. Because of the quality features - and reasonable price - these rugged milling machines are also popular with home and garage shop machinists.
IS THE TOOL PACK HELPFUL?
The FREE tool pack is intended to proved a basic tool set-up to get you started when your machine arrives. It’s a balanced set of tooling, but you will likely need more tooling once you figure out specific projects you want to do.
WHAT DO YOU MEAN BY “INSPECTED TWICE?”
Each lathe is inspected by trained company employees at the factory - PLUS, a second complete inspection is performed at our warehouse in Ann Arbor, MI before it is sent to the customer.
WHY ARE THESE MILLS BETTER THAN OTHERS ON THE MARKET?
For a machine tool to be truly great it must have attention paid to every step of its development - design, production, quality control, testing, and after sales support. No other bench top lathe on the market, at this price, has the same level of quality commitment at every step as these MIDAS mills.
HOW LONG HAVE YOU BEEN SELLING THESE MILLS?
Over 30 years.
DO MANY LATHE BUYERS ALSO PURCHASE MILLING MACHINES?
Yes, the MI-1440 lathe matches well with the MI-409MZ milling machine - a machine shop combo that was built to last. Many customers buy this combination.
WHY SHOULD I BUY A MILLING MACHINE FROM SMITHY?
Rugged Design
Quality Built In
Inspected Twice
Best Service Support
The best bench top mill value - for over 30 years!
DO I NEED TO BE A MACHINIST TO USE THE MACHINE?
NO, many buyers of these machines don’t have the experience. What they have is the need to make a certain part or product. What you need is a commitment and curiosity. We have a set of machining training videos on our website. You can usually find classes at a local community college or vo-tech school. Get a machine and get going! You won’t be disappointed.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Overview
Use this section to highlight specific product features to your customers.
Product comparison grid
Add content here to explain a bit about the range of products on offer and which ones may be most suitable for your customers.
