Smithy 409 MZ Mill Specs

Model	Smithy 329M Mill	Smithy 409 MZ Mill
Motor Size	1.5 HP	2 HP
Electrical Requirements	110 VAC or 220 VAC (Convertible)	110 VAC or 220 VAC (Convertible)
Amperage	9 Amps @ 220 Volt / 18 Amps @ 110 Volts	9 Amps @ 220 Volt / 18 Amps @ 110 Volts
Table Size	31.5" x 9-3"	40" x 9-3"
X-Axis Travel	22"	25"
Y-Axis Travel	7.25"	7.25"
Quill Travel	5"	5"
Head Travel	15"	15"
Mill Column Construction	Square with Adjustable Dovetail Ways	Square with Adjustable Dovetail Ways
X & Y Axis Construction	Adjustable Dovetail Ways	Adjustable Dovetail Ways
Headstock Lubrication	Oil Bath Reservoir & Site Gauge	Oil Bath Reservoir & Site Gauge
Spindle Speeds	95, 175, 310, 450, 850, 1500	95, 175, 310, 450, 850, 1500
Spindle Taper	R8	R8
Spindle Center To Column	9.5"	10"
Spindle Nose To Table Distance	2.5" to 18.25"	2.5" to 16.5"
Digital Position Readout On Quill	Standard	Standard
Powerfeed (X-Axis)	Optional	Standard
Powerfeed Z-Axis (Spindle)	N/A	Standard
Automatic Tapping Cycle	N/A	Standard

ELECTRICAL SPECIFICATIONS

Model	Smithy 329M Mill	Smithy 409 MZ Mill
Power Requirements	110V/220VAC, Single Phase (Convertible)	110V/220VAC, Single Phase (Convertible)
Plug	6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied)	6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied)
Outlet (Not Included)	5-15R for 110 VAC, 6-15R for 220 VAC	5-15R for 110 VAC, 6-15R for 220 VAC
Motor Type	Induction Type A/C	Induction Type A/C
Motor Power	1.5 HP	2 HP
Motor Amp Draw	18 Amps @ 110 VAC / 9 Amps @ 220 VAC	18 Amps @ 110 VAC / 9 Amps @ 220 VAC

MECHANICAL SPECIFICATIONS

Model	Smithy 329M Mill	Smithy 409 MZ Mill
Spindle Speed Control	Mechanical	Mechanical
Number Of Speeds	6	6
Available Speed	95, 175, 310, 450, 850, 1500	95, 175, 310, 450, 850, 1500
Longitudinal Travel	22"	30"
Cross Travel	7.25"	7.25"
Quill Travel	5"	5"
Spindle Taper	R8	R8
T-Slot Size	5/8"	5/8"
Draw Rod Size	7/16" x 20	7/16" x 20
Drill Chuck / Arbor	Included 1/2" Drill Chuck on an R8 Arbor	Included 5/8" Drill Chuck on an R8 Arbor
Mill Head Rotation	90 Degrees Left of Right	45 Degrees Left of Right
Mill Head Lubrication	Oil Bath with Reservoir and Site Gauge	Oil Bath with Reservoir and Site Gauge
Dial Calibrations	.001"	.001"
Mill Feed	Both Coarse and Fine Feed	Both Coarse and Fine Feed
Powerfeed X-Axis	Optional	Standard
Powerfeed Z-Axis (Spindle)	N/A	Standard
Max Drill Size	1"	1"
Max Face Mill	3"	3"
Max End Mill	1"	1"
Max Tapping	1/2"	1/2"

PHYSICAL DIMENSIONS

Model	Smithy 329M Mill	Smithy 409 MZ Mill
Machine Weight	716 lbs	786 lbs
Machine Size	36" L x 34" W x 56" H (at heighest point of travel)	40" L x 34" W x 56" H (at heighest point of travel)
Footprint	25" x 16"	25" x 16"
Shipping Weight	807 lbs	870 lbs
Shipping Crate Size	41" L x 36" W x 48" H	41" L x 36” W x 48" H
Shipping Crate Material	Wood	Wood