Siemens 808D Videos

Introduction 
This video includes introducing words and shows the drawing of the workpiece. 
Powering machine, and sending to home reference position
This video shows how to switch on the machine and reference the axis.
Control Layout
This video explains the controller: machine screen, panel processing unit and machine control panel.
Part Overview and Machining Strategies
This video explains the controller: machine screen, panel processing unit and machine control panel.
Tool Setup
This video shows the tools which are used and the setup of the tools.
Coordinate System 
This video explains the coordination system.
Opening a New Program
This video shows the setup of the workpiece. 
Face Milling-Cycle 71
This video shows and explains cycle71 face milling.
Contour Editor
This video shows the function of the contour editor.
Cycle72 Contour Milling
This video shows and explains cycle72 contour milling.
Pocket4 Circular Pocket
This video shows and explains pocket4 circular pocket. 
Chamfering
This video shows how to enter the data for the chamfering.
Cycle 82 Centering Drilling Calculator
This video shows and explains cycle82 centering.
Drilling Cycle 83 
This video shows and explains cycle83 drilling.
Tapping Cycle 840
This video shows and explains cycle840 tapping. 
Simulation 
This video shows how to enter message blocks and the simulation of the program.
Dry Run 
This video shows how to dry run a program.
Machining 
This video shows the machining of the workpiece.
Tool Wear
This video shows how to enter data for the tool wear compensation.

 

automate logo
Smithy logo

  800-476-4849  |  170 Aprill Drive  |  Ann Arbor, Michigan 48103  |  USA
Entrust Seal