Gear Drive Mill Specifications

Specification MI-409M MILL MI-329M MILL
 
GENERAL MILL SPECIFICATIONS
Shipping Weight 1077 lbs 827 lbs
Machine Weight 966 lbs 716 lbs
Crate Size 39" x 40" x 40" 35" x 30" x 40"
Work Area Requirements 73" x 50-1/2" 73" x 50-1/2"
Length 38-1/2" 35"
Width 55" 47"
Height 56" 56"
Footprint 25" x 16" 25" x 17"
T-Slot Size 5/8" 5/8"
Powerfeed (X-Axis) Yes Optional
Powerfeed (Y-Axis) Yes N/A
Powerfeed (Z-Axis) Yes (Head) N/A
Table Size 40" x 9-1/2" 31-1/2" x 9-1/2"
ELECTRICAL SPECIFICATION
AMP 7 16
HP 1.5 1.5
Motor Type AC AC
Phase Single Single
Volt 220 A/C 110 A/C
MILL/DRILL SPECIFICATIONS
Column Dovetail Ways Dovetail Ways
Dial Calibration Drill-Coarse Feed 0.045" N/A
Dial Calibration Mill-Finefeed 0.001" 0.001"
Dial Calibration X-Axis 0.001" 0.001"
Dial Calibration Y-Axis 0.001" 0.001"
Drawbar Size 7/16" 7/16""
Drill Chuck Size 5/8" 5/8"
Drill Chuck Arbor R8/JT3 R8/JT3
Feed Rate (X-Axis) .945-3.307" N/A
Feed Rate (Y-Axis) .945-3.307" N/A
Feed Rate (Z-Axis) .0024-.0118" N/A
Rotating Mill Head 90°(Left and Right) 90°(Left and Right)
Head Travel 16-1/4" 15-1/2"
Quill Diameter 3" 3"
Quill Travel 5" 5"
Spindle Center to Column 11" 11"
Spindle to Table (Distance) 0" to 16-1/4" 1-1/2" to 17"
Spindle Speeds 95, 175, 310, 450, 850, 1500 95, 175, 310, 450, 850, 1500
Spindle Taper R8 R8
Tool Size Limits:
- - - Drill Capacity 1" 1"
- - - Face Mill Capacity 3" 3"
- - - End Mill Capacity 1" 1"
- - - Tapping Capacity 1/2" 1/2"
X-Axis Travel 25" 19-3/5"
Y-Axis Travel 6-3/8" 6-3/4"
dmt logo

  800-476-4849  |  170 Aprill Drive  |  Ann Arbor, Michigan 48103  |  USA