Midas Features

MIDAS MACHINE FEATURES:

  • Precision – Repeatability to to 0.001”
  • Large Work Table – Larger work pieces
  • Thread Cutting – Right, left, inch and metric
  • Power Feeds – On all LTD model
  • Larger Spindle Bore – Up to 1” bar stock

FEATURES

 

EXTENDED MILL HEAD

40% more milling capacity.

TWO SEPARATE MOTORS

Match the power to the job, 3/4HP lathe motor, 3/4HP mill/drill motor.

 

QUICK CHANGEOVER

12” mill clearance allows room for both mill and lathe setups without removing the lathe chuck. Removing the chuck allows for even bigger work.

THREADING DIAL AND HALF-NUT

Cut and chase threads quickly and easily – and as accurately as a master machinist.

BI-DIRECTIONAL POWER FEED

On both leadscrew and crossfeed assures fine finishes on both mill and lathe work.

RACK & PINION FEED ON CARRAIGE

Quickly position your cutting tools and zip your carriage back and forth to speed your work..

MACHINE FEATURES:

 

POWER FEED ENGAGE HANDLE

Position cutting tool, adjust speed and engage, as simple as that.

MILL/DRILL HEAD LOCK

Tightens mill head in desired position for rock solid milling and drilling.

HEADSTOCK MOVES 360 DEGREES

Swing mill head out of the way when using lathe, swing back and lock to mill or drill.

7/16” T-SLOT

Standard size t-slot for holding tools and workpieces.

SPECIAL DOVETAIL WAYS

Dovetail provides accuracy and rigidity, ground and hardened for long-life and accuracy.

LIFTING HANDLES

Convenient slide away lifting handles.

BELT TENSION SYSTEM

Release handle to loosen belt, engage handle to re-tension belt before operation. Allows for quick and easy speed changes.

POWERFEED GEARBOX

Two speed gearbox provides a range of speed combinations to power leadscrew.

TABLE LOCKS

X and Y axis can both be locked down for solid milling results.

12 SPEED MILL HEAD

Rugged design is also adaptable to a range of machining applications.

THREE JAW CHUCK

Precision, self-centering 3-jaw chuck comes installed on the machine as part of the Quick-Start Tool Package. See more tool package information at the bottom of this page.

MICROFEED HANDLE

Engage microfeed clutch and rotate handle to perform operations that require microfeed measurements.

OFFSET TAILSTOCK

Cut tapers on the lathe and adjust for super accuracy.

FLOATING DIALS

Set starting points for threading and other functions. X and Y read in 0.001" increments.

Sorry, there are no products in this collection