Manual Mill Milling Set-Up Accessories

Ten-piece angle block set. The angles included are 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°. You can combine them to make any integral angle.

3" Precision screwless sine vise. Jaw width is 3.15", jaw depth is 1.25", jaw opening is 4". The base size is 7.638" x 3.15" and the vise weighs a solid 17 pounds. The center distance of the cylinders is 5.000". Hardened and precision ground to a tolerance of .0004" for both parallelism and squareness. Sine range: 0 - 60°. Jaw can be opened or closed without unbolting vise from work surface. Hold the vise to the work table with straps and clamps, 35-000, or with toe clamps. It can also be held in the 3" and 4" and 5" Superlock vises. K99-310, K99-320, and K99-330 respectively.

Functions as a rotary table or a super indexer. Mount it to your Smithy for single purpose or indirect indexing using the indexer's worm drive mechanism. Use the 6" chuck for a quick and easy way to mount small workpieces. Remove the chuck, attach the faceplate and its horizontal/vertical rotary table. 93 pounds. Total freight shipping cost of $119.99 to the contiguous 48 states. If shipping to Hawaii, Alaska, or internationally, please give us a call.

Round stock sits firmly in the V-groove of these 1-1/4" square x 1-5/8" long blocks. Includes iron clamps with 1" capacity. These clamps can also be used in a vise to more securely hold round stock when milling. Extras clamps can be purchased individually, see 34-011.

Misplaced a clamp for your v-block? Keep a spare or two, just in case These clamps are intended for use with V-Block Set, 34-010. They have a capacity of up to 1" diameter round stock.

Give your projects a boost and/or bolt directly to these matching pairs of precision-ground blocks. Drilled and tapped with 3/8-16” holes for clamping these block are 1” wide, 2” high, 3” long with a +/-0.0001” squareness on each side. Dimensions 1" x 2" x 3"

One of the biggest challenges for milling a small flat object is getting the mill close to the work without extending the quill all the way out. The further out you extend any tool, the more deflection and chatter you're likely to experience. The step block brings that work up to the mill spindle in a solid easy-to-use manner. It fastens to the mill table using the strap and clamp set, 35-000. Create different mounting configurations and get small projects up to the mill with this handy step block. Block is 12" x 6" x 5" and uses the standard 7/16" t-slot nuts. Weight: 40lbs. There will be an extra $40 shipping charge to ship this item to any location in the contiguous 48 states. Please call for shipping cost to HI, AK, or International locations. Order it with your machine to save shipping costs.

Use this 52-piece clamp set to hold down practically any shaped workpiece to the milling table. Set includes: 24 studs, 4 each of 3”, 4”, 5”, 6”, 7” and 8”, six pairs of no-slip step blocks, 6 t-nuts, 6 flanged nuts, 4 coupling nuts and a holding case.

The machinist's jack includes lots of parts that you can mix and match to meet your needs. Machinist's jacks are used to support odd-sized or odd-shaped objects. Use them to support the ends of long workpieces that extend beyond your vise jaws. Use them to support the edges of items that you are clamping with your clamping kit.

Boost your work up in the vise while keeping absolute flatness with these precision-ground and hardened parallels. All are 5/32" thick, 3" long and include widths of 1/2", 5/8", 3/4" and 7/8".

You'll have the perfect size of parallels for every job with this set. Six adjustable pairs range from 3/8" to 2-1/4" wide, 1-3/4" to 5" long. Adjust to measurement with lock down and setscrew.

The heights of the parallels are 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8", and 1-11/16".

When you need to set up at 90 degrees to the table, reach for this angle plate. Heavy and gusseted for rigidity, the plate is 6” long, 5” wide, and 4-1/2” high, weighing 6.9 pounds.

The Adjustable Angle Plate can be tilted to 45 degrees left or right. This allows for milling of bevelled surfaces. If you can not tilt the mill head, now you can tilt the work piece. It can also be used for raising the work piece closer to the mill for machining smaller items. Great addition to any shop.

Table size 7" x 5" Height 3 7/8"

Cut gears and patterns quickly and easily with this ultimate cool tool. The 7” high head swings 6-1/2” and rotates up to 90 degrees or down to negative 10 degrees from horizontal. Features hardened and ground worm gear with 40:1 ratio, positive-locking mechanism with 360-degree brake shoe, and tapered roller bearings. Includes faceplate, tailstock, center and dog, threaded backplate, and three dividing plates. Shipping weight is 42 pounds.