You are here
› Machine Tools › Manual Mills › MI-409MZBenchtop Milling Machine MI-409MZ
- Gear-drive Z Axis Power Feed - with Power Tapping
- Built-In Z Axis Digital Read Out - Optimum accuracy
- Electric Powerfeed on X axis
- Handy Operator Control Panel - accessible and safe to operate
- Machine Capabilities: Milling, Drilling, and TAPPING
- Power feed on X and Z axes improves accuracy, speed, and usability.
- Rigid dovetail ways provide stability and increased accuracy
Smithy Quality is Tops: Smithy designs and builds some of the best machines. We pay attention to details, all through the process. Smithy is well-known for it's after sales service and two year warranty. Each machine is inspected twice - before it leaves the factory and before it leaves our warehouse in Ann Arbor, MI to head your way.
- 2 HP - 110/220 Volt
- Weighs in at nearly 1000 lbs. Weight gives rigidity
- R-8 Tooling - Industry Standard
- Mechanical Power Feed on Z Axis
- Z Axis Digital Readout
- Tapping Capabilities
- Power Feed on X Axis
- Accurate - Convenient Gib Adjustments
- Excellent FREE Tool Pack
- See Features and Specs Tabs for More Product Details
- 2 Years Parts Warranty
- Rugged Design
- Quality Built In
- Inspected Twice
- Best Service Support
MI-409MZ Benchtop Milling Machine -- Features & Benefits
| Heavy Duty Cast Base and Column | Over 700 lbs. of cast iron provides positive damping effect - offers greater accuracy. |
| Flat Dove Tail Ways | Supports more weight with better weight distribution. |
| Hand Scraped Ways | Another plus for greater accuracy. |
| Adjustable Gibs | Allows for adjustment to assure maximum accuracy. |
| Square Column | Keeps mill head properly indexed to the table, assuring accuracy. |
| Gear Driven Spindle | No belts to change. More consistent power conversion and torque. |
| Easy Single Lever Speed Adjustment | Easy to select appropriate speeds. Always works at the correct speed. |
| 90 Degree Rotating Head | Set and indicate mill head to accurately mill at angles between 0-90 degrees. |
| Z Axis Digital Readout | Very accurate measurements of cut depth. Fast and efficient. |
| 2 HP 110V Spindle Motor | Big power and torque. Set the motor to operate with 110V power. Convertible from 110V to 220V power. |
| 5” Cutting Depth on Mill Head | Good runout from min to max depth. |
| Mill Head/Z Axis Digital Readout | Easier for operator to machine to exact points - maximizes accuracy. |
| Power Down Feed on Spindle | 6 speeds for spindle speed; 6 speeds for spindle feed rates. |
| Tapping Capabilities | Power tapping up to 1/2” (12mm). |
| Mechanical Power Feed on Z Axs | Unique Z axis powerfeed offers the best in accuracy and operator convenience. |
| Bridgeport Standard R8 Collet | Industry standard cutting tools and holders are low cost and easy to use. |
| Adjustable Power Feed Stops | Disengages power feed when operation meets the feed stop. Allows operator to step away from the mill while power feed operation is taking place. |
| Long Bed and Work Table | 9” x 40” work table offers lots of room for complex or multiple set-ups. |
| Bridgeport Standard 5/8” T-Slot | Industry standard clamping/holding accessories are low cost and easy to use. |
| Independent Operator Control Panel | Electrical controls in one location for easy, ergonomical mill operation. |
| Lockable Main Power Switch | Separate, easy access to main power switch. A lock can be used to limit unauthorized access. |
| Easy Access Electrical Control Box | Components and wiring are laid out well for easy access and testing, |
| 24 Volt Power to Operator Control | Assures greater operator safety. |
Featured Specifications
| Model |
| Motor Size |
| Electrical Requirements |
| Amperage |
| Table Size |
| X-Axis Travel |
| Y-Axis Travel |
| Quill Travel |
| Head Travel |
| Mill Column Construction |
| X & Y Axis Construction |
| Headstock Lubrication |
| Spindle Speeds |
| Spindle Taper |
| Spindle Center to Column |
| Spindle Nose to Table Distance |
| Digital Position Readout on Quill |
| Powerfeed (X-Axis) |
| Powerfeed Z-Axis (Spindle) |
| Automatic Tapping Cycle |
| MI-329M | MI-409MZ |
| 1.5 HP | 2 HP |
| 110 VAC or 220 VAC (Convertible) | 110 VAC or 220 VAC (Convertible) |
| 9 Amps @ 220 Volt / 18 Amps @ 110 Volts | 9 Amps @ 220 Volt / 18 Amps @ 110 Volts |
| 31.5" x 9-3" | 40" x 9-3" |
| 22" | 25" |
| 7.25" | 7.25" |
| 5" | 5" |
| 15" | 15" |
| Square with Adjustable Dovetail Ways | Square with Adjustable Dovetail Ways |
| Adjustable Dovetail Ways | Adjustable Dovetail Ways |
| Oil Bath Reservoir & Site Gauge | Oil Bath Reservoir & Site Gauge |
| 95, 175, 310, 450, 850, 1500 | 95, 175, 310, 450, 850, 1500 |
| R8 | R8 |
| 9.5" | 10" |
| 2.5" to 18.25" | 2.5" to 16.5" |
| Standard | Standard |
| Optional | Standard |
| N/A | Standard |
| N/A | Standard |
Electrical Specifications
| Model |
| Power Requirements |
| Connection Type |
| Plug |
| Outlet (not included) |
| Motor Type |
| Motor Power |
| Motor Amp Draw |
| MI-329M | MI-409MZ |
| 110V/220VAC, Single Phase (Convertible) | 110V/220VAC, Single Phase (Convertible) |
| Plug & Cord | Plug & Cord |
| 6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied) | 6-15P 220 Volt (supplied), 5-15P 110 Volt (not supplied) |
| 5-15R for 110 VAC, 6-15R for 220 VAC | 5-15R for 110 VAC, 6-15R for 220 VAC |
| Induction Type A/C | Induction Type A/C |
| 1.5 HP | 2 HP |
| 18 Amps @ 110 VAC / 9 Amps @ 220 VAC | 18 Amps @ 110 VAC / 9 Amps @ 220 VAC |
Mechanical Specifications
| Model |
| Spindle Speed Control |
| Number of Speeds |
| Available Speed |
| Longitudinal Travel |
| Cross Travel |
| Quill Travel |
| Spindle Taper |
| T-Slot Size |
| Draw Rod Size |
| Drill chuck / Arbor |
| Mill Head Rotation |
| Mill Head Lubrication |
| Dial Calibrations |
| Mill Feed |
| Powerfeed X-Axis |
| Powerfeed Z-Axis (Spindle) |
| Max Drill Size |
| Max face mill |
| Max End Mill |
| Max Tapping |
| MI-329M | MI-409MZ |
| Mechanical | Mechanical |
| 6 | 6 |
| 95, 175, 310, 450, 850, 1500 | 95, 175, 310, 450, 850, 1500 |
| 22" | 30" |
| 7.25" | 7.25" |
| 5" | 5" |
| R8 | R8 |
| 5/8" | 5/8" |
| 7/16" x 20 | 7/16" x 20 |
| Included 1/2" Drill Chuck on an R8 Arbor | Included 5/8" Drill Chuck on an R8 Arbor |
| 90 Degrees Left of Right | 45 Degrees Left of Right |
| Oil Bath with Reservoir and Site Gauge | Oil Bath with Reservoir and Site Gauge |
| .001" | .001" |
| Both Coarse and Fine Feed | Both Coarse and Fine Feed |
| Optional | Standard |
| N/A | Standard |
| 1" | 1" |
| 3" | 3" |
| 1" | 1" |
| 1/2" | 1/2" |
Physical Dimensions
| Model |
| Machine Weight |
| Machine Size |
| Footprint |
| Shipping Weight |
| Shipping Crate Size |
| Shipping Crate Material |
| MI-329M | MI-409MZ |
| 716 lbs | 786 lbs |
| 36" L x 34" W x 56" H (at heighest point of travel) | 40" L x 34" W x 56" H (at heighest point of travel) |
| 25" x 16" | 25" x 16" |
| 807 lbs | 870 lbs |
| 41" L x 36" W x 48" H | 41" L x 36” W x 48" H |
| Wood | Wood |
- Rugged Design
- Quality Built In
- Inspected Twice
- Best Service Support
Smithy Machine Shipping - FAQs
1. Basic Shipping Info
Machines within the continental US (lower 48 states) are shipped with a freight carrier - either YRC or Estes Express.
We offer 3 delivery options: Basic, Business and Deluxe. All machines and accessories that are in stock will ship out within
48 hours of purchase. Once shipped you'll receive an automatic email (if provided) with tracking information for the designated
freight carrier (YRC or EST). For pricing to Alaska, Hawaii and Puerto Rico, please call for a shipping quote.
2. Basic Delivery – Pick up from terminal
This delivery method will bring the machine to the freight terminal nearest you for pick up. Once the machine arrives at the terminal, they'll call you to let you know it's ready for pick up. They will load the machine into an open bed pickup, cargo van or trailer. You will need to bring with you an ID and proof of purchase which will be sent to you during the sales transaction.
YRC Terminal Nearest You
Click here to find the nearest YRC Terminal
Estes Express Terminal Nearest You
3. Business Delivery – Forklift
The freight carrier will bring the machine directly to your business for easy offloading without notification - they assume if it is being delivered to a business that the business will be open during normal business hours. For this delivery method, you must have a forklift and your business must be semi-trailer accessible. If you are unsure about semi-trailer accessibility please contact the terminal to discuss options.
4. Deluxe Delivery – Residential
Lift gate curbside delivery -- the freight carrier will lower the machine to ground level, curbside, at the end of your driveway. They will generally use a box truck with a lift gate. That is not 100% guaranteed, so if your residence doesn't have box truck accessibility please contact your local terminal to discuss options. Also, there must be someone home to sign for delivery.
Click here to find the nearest YRC Terminal
Click here to find the nearest Estes Terminal
****The driver will not help you move or setup the machine. Please note that this delivery method will be an additional $70 charge on top of standard shipping rate.****
5. Shipment Tracking
Once your machine has left our warehouse, you'll receive an automated email with the tracking/PRO number. You can visit the Estes website at www.estes-express.com or the YRC website at www.yrc.com to track your shipment and know when it has arrived to the destination terminal. The terminal will not call you to let you know your shipment has arrived at the terminal or when it will be delivered to your business of choice. ONLY WITH LIFTGATE/RESIDENTIAL DELIVERY: Once your machine has reached the destination terminal, you will be contacted by a representative from the terminal to schedule a delivery window for drop off with the lift gate truck.
6. Shipping Prices
$269 - MI-1220 and MI-1230 LTD
$269 - Granite XT 1324
$329 - Granite XT 1340
$329 - Stand Alone Mills and Lathes (MI-329M, MI-409MZ, MI-1337L, MI-1440L)
***All stands - $80 to ship with machine, $140 without machine***
***Lift-gate delivery – Additional $70***
(Pricing is for the lower 48 states only, please call 800-476-4849 for pricing to any other locations or rate quotes on any machines not listed above.)
7. Transit Times
Shipping times will vary around the US. We ship directly out of Ann Arbor, MI 48103. To find out your specific travel time, click on the following link to the Estes website Transit Time Calculator
Deluxe delivery usually requires an extra 1-3 days to schedule a delivery appointment according to the vehicles route schedule.
8. Parts and Accessories Shipping
Accessories and parts are shipped with UPS and USPS the *SAME DAY* if ordered by 1pm EST. Machine Stands, Super Indexers, and Rotary tables are all shipped via freight carrier due to the size and weight and will require an extra shipping charge. All Accessories and parts are shipped standard ground unless otherwise specified.
9. Shipping to Canada
We offer two different options when dealing with customs, duties and taxes going into Canada. The first option is to act as your own servicing agent, we'll sell you the machine and ship from our location to the border; contacting a broker and paying duties, taxes and fees is up to you. The second option would be an all-inclusive package where we take care of everything for you; your job is to prepare to receive the machine when delivered. Please give us a call to get a shipping quote - the quote will include the cost of freight, GST/HST, and customs border crossing fees.
10. International Shipping
Depending on the country in which you live, we will quote and ship to the port nearest you. Forwarding from the port to your door will be your responsibility, as well as paying import customs and taxes to your government. You must provide the machine you are interested, with any accessories, valid contact information, a ship-to address, and the port nearest you to obtain a quote. Please give us a call or email to discuss your options.
